£ 310.00

The door is made of a wooden rail and stile set topped with two flush HDF boards covered with veneered surface. The wood grain on the rail and stile set is vertical. On panels it can be horizontal (W02-W02A, W03-W03A) or vertical (W00, W04).
A single-sided magnetic board (Z/AZ) or a single-sided mirror (WL Z, WL A/Z) can be attached to the door leaf.


  • White/brown/graphite glass, 4 mm thick
    W01, W05 patterns – tempered glass, 4 mm thick

  • Single-point mortise lock (rebated system) or magnetic mortise lock (non-rebated system), key-operated, for a cylinder or a bathroom lock

  • Hinges: K type

  • The door closer is not applicable


"60" - 676mm min installation hole width / 786 mm - max installation hole width
"70" - 776mm min installation hole width / 886 mm - max installation hole width
"80" - 876mm min installation hole width / 986 mm - max installation hole width
"90" - 976mm min installation hole width / 1086 mm - max installation hole width

min installation hole height: 2053 mm
max installation hole height: 2112 mm


min 75 mm
max 300mm


311 light oak, 312 limba, 323 rustic oak, 334 european oak, 351 marrone, 370 white-stained oak, 371 truffle oak, 372 coffe oak, 373 white oak, 374 sand oak, 375 gray oak, 376 steel oak, 377 platinum oak, 380 natural ash, 381 moreno ash, 382 rubio ash, 383 negro ash, 404 dark walnut, 405 light walnut, 421 cappucino, 422 mokka, 424 teak


Right hand (RH), Left hand (LH),

ADDITIONAL EQUIPMENT (at an extra charge)

  • Size “100”

  • Non-standard door shortening (maximum door shortening available: up to 60 mm):
    door shorter by 20 mm (the lower element of the door has a non-standard height)
    door shorter by 30-60 mm (the upper and the lower element of the door has a non-standard height)

  • Door lower by 50 mm

  • Door higher by 50 mm or 100 mm

  • Ventilation trim